Tag Archives: this

Anet A2 3D Printer Build // Is this cheap printer any good?

Check out my experience building the Anet A2 printer, my first prints and impressions.
Buy the Anet A2 printer here : https://goo.gl/RV3nBi
Download the ‘Magic S’ file here : https://goo.gl/QIeykz

A lot of viewers were asking about cheap 3D printers, so I decided to try out the 8 A2 to see if it’s good for something.

*this printer was sent to me for free in exchange for an unbiased review*
Video Rating: / 5

Do not Pre Order the TIKO 3D printer until you watch this video

Just wanted to give everyone a update on my experience with the Tiko3D Printer so far.. This is not my final review.. But felt it was important as Pre-Orders start before my review will be finalized

***
Sorry due to Youtube processing time delay.. this released about same time as the Live Stream started!!
***

Tiko Q&A Live Stream: https://www.youtube.com/watch?v=3ychGdpKdb4
** TIKO 3D arrived to the live stream and started talking to us about half way thru the stream…

Positive hopes from TIKO’s Responses! I will do a follow up once I get updates from Tiko!

This 3D printer can rival standard manufacturing on the factory floor

This 3D printer can rival standard manufacturing on the factory floor
Start-up Carbon began shipping its industrial-grade 3D printer with the expectation that big-name companies will soon be using it to replace traditional forms of manufacturing. Last year, the Silicon Valley company emerged from quiet mode to announce …
Read more on Computerworld

3D Printing: The Stories We Didn't Cover This Week — April 23

3D Printing: The Stories We Didn't Cover This Week — April 23
In this week's 3D printing news we see a partnership forged between Latvia's Mass Portal and Ohio's DesignBox3D, for the distribution of Mass Portal's high-quality 3D printers. Also, Autodesk has acquired Solid Angle, in an effort to get more into the …
Read more on 3DPrint.com

Mysterious Wire-Feed, Powderless Metal 3D Printer to Be Unveiled Sometime This

Mysterious Wire-Feed, Powderless Metal 3D Printer to Be Unveiled Sometime This
If you've been keeping up with 3D printing news at all, you're probably pretty familiar with metal 3D printing by now. It's one of the fastest-growing sectors in the industry; just about every major 3D printer manufacturer is scrambling to keep up with …
Read more on 3DPrint.com

This 3D Printer Builds Full-Color Paper Models!

Traditional desktop 3D printers use melted plastic as their build material, but Mcor’s printers layer sheets of paper on top of each other to create their models. We check out the new Mcor Arke, a printer that cuts from a large spool of paper, glues those sheets together, and then prints color on them to turn digital files into large paper models!

Shot by Adam Isaak and edited by Joey Fameli

Subscribe for more videos! http://www.youtube.com/subscription_c…
Follow us on Twitter: http://www.twitter.com/testedcom
Get updates on Facebook: http://www.facebook.com/testedcom

Tested is:
Adam Savage http://www.twitter.com/donttrythis
Norman Chan http://www.twitter.com/nchan
Joey Fameli http://www.twitter.com/joeyfameli

Thanks for watching!

3D Printing: The Stories We Didn't Cover This Week: November 21

3D Printing: The Stories We Didn't Cover This Week: November 21
This week's stories we didn't cover include news that Rehovot, Israel-based Opel has successfully used Stratasys 3D printers to eliminate manufacturing tool production costs by 90%. And there's no better sign that 3D printing technologies are becoming …
Read more on 3DPrint.com

Injection molding meets 3D printing in this 300 piece 3D printed injection

Injection molding meets 3D printing in this 300 piece 3D printed injection
Additive manufacturing or Injection Molding? It's a debate that has been going on for years, particularly since 3D printing became known as Fourth Industrial Revolution, promising to displace the cost, time, and material waste associated with …
Read more on 3ders.org (blog)