Time lapse photography of a 3D print on a Makerbot Replicator. This is my first print at .1mm layer height. There is a significant increase in detail compared to printing the same model at .2mm height. It takes longer, but in a print like this it is worth it. The layer ridges are still visible, but are much less evident.
.2mm is fine for general printing, including things such as brackets, toys, and iPhone docks. When you have a model with fine detail, give .1mm a try I think you will like it!
The 3D model can be found here: http://www.thingiverse.com/thing:14104
If you are interested in 3D printing, please subscribe to this channel for a series of demonstrations and how-to videos. If you have a question, I will reply in the comments below. Thanks!
Video Rating: / 5