default-1

Ultimaker 2 Unboxing, Review & Lot’s of Drooling : My Favorite 3D Printer

Ultimaker 2 Unboxing, Review & Lot's of Drooling : My Favorite 3D Printer

I finally received my Ultimaker v2 thanks to my buddy Sander who has been a huge support to my 3D printing adventures. I have had the Ultimaker 1 for a while and have done tons of prints and the thing is an absolute dream but it lacks a heated bed and looks like it was built in wood shop. So I was super excited to see the Ultimaker v2 looking like a Ferrari with it’s frosted translucent sides and very tidy wiring and not to mention the bed and most beautiful build platform I’ve ever seen. The printer also had some features that I wasn’t expecting like an LED illuminated build platform that will make all my future 3D printing videos on this unit look AMAZING!

Purchase Your Ultimaker 3D Printer @ http://bit.ly/1CvAnud

Help the channel by using affiliate links below!
Donate if you enjoy my videos @ http://bit.ly/helpbarnacules
Shop Amazon US @ http://amazon.barnnerd.com
Shop Amazon UK @ http://amazonuk.barnnerd.com
Buy Ultimaker 3D Printer @ http://bit.ly/1CvAnud
Subscribe to 1UP BOX @ http://bit.ly/1tuoBP9
Subscribe to Nerd Block, Horror Block & Arcade Block @ http://bit.ly/1l1SvSn
Buy Static Stuff T-Shirts @ http://staticstuff.com
Buy Shirt Punch T-Shirts @ http://bit.ly/1miE9iL
Subscribe to Nature Box (Yum!) @ http://bit.ly/1orunJ7
Subscribe to Astrill VPN (Privacy on the internet) @ http://bit.ly/1fegWXy
Buy my Vlogging Camera @ http://bit.ly/1bYx30C
GT Omega Racing Office Chairs @ http://bit.ly/1lA4h4K
-or-
Use code ‘NERDGASM’ at checkout!

Use Coupon Code ‘NERDGASM’ at checkout on http://thatsmyface.com to save 10% instantly!

Use coupon code ‘Barnacules’ at checkout when ordering your Nerd Block or Horror Block using my affiliate links below to save 10% off your first month subscription!

Use coupon code ‘Nerdgasm’ at checkout when ordering from StaticStuff.com and save 10%

Come talk to me…
Tweet me @ http://twitter.barnnerd.com
Facebook me @ http://facebook.barnnerd.com
Instagram @ http://instagram.barnnerd.com
Email me @ BarnaculesManCave@gmail.com

NOTES
The bad print quality on the test print was due to the broken cooling fan from shipping/customs. The print quality will be perfect once I replace the fan arrives which Ultimaker has already shipped to me! They have fantastic support.

The Ultimaker 2
To operate the Ultimaker 2 you don’t need any specific technical knowledge. Every part has been redesigned to create one of the highest performing 3D printer available on the market, but also a very reliable one.

Ultimaker 2 specifications
Easy to use and reliable
Designed for non-expert and expert
Larger build envelope
Heated bed
Low cost material

Open source
Just like the Original the Ultimaker 2 will remain open source. We dare to share our knowledge because we believe we can achieve even more when working together.

Easy to use and reliable
To operate the Ultimaker 2 you don’t need any specific technological knowledge. With its 49 decibel it’s a quiet machine. Because the electronics are bundled the Ultimaker 2 is stable and reliable. With its nice design the Ultimaker 2 is suitable in any working or living interior.

Designed for non-expert and expert
We’ve made the Ultimaker 2 to be as easy as possible. You don’t need to have a huge technological background to understand our printer. At the same time we’ve developed the printer in a way that it’s still interesting for experts to work and create with.

Larger build ratio
We’ve managed to get an even better print-to-size ratio. This means the printer size has remained the same, and the print envelope became bigger.

Low cost material
Beside the fact that the Ultimaker doesn’t use a lot of power, the material you use to print is also low cost. This makes the use of an Ultimaker very affordable.

Layer resolution: up to 20 micron
Build volume: 23 x 22.5 x 20.5 cm
Position precision X Y Z: 12.5 / 12.5 / 5 micron
Print speed: 30 mm/s – 300 mm/s
Travel speed: 30 mm/s – 350 mm/s
Recommended filament diameter: 2.85 mm
Nozzle diameter: 0.4 mm
Stand-alone SD-card printing
WiFi printing ready (future upgradeable)
Software: Cura – Official Ultimaker
Print technology: Fused filament fabrication (FFF)
Frame dimension X Y Z: 35.7 / 34.2 / 38.8 cm (no filament)
Frame dimension X Y Z: 49.2 / 34.2 / 55.8 cm (with filament)
Operation nozzle temperature: 180° – 260° C
Operation heated bed temperature: 50° – 100° C
Ambient operation temperature: 15° – 32° C
Storage temperature: 0° – 32° C
AC input: 100 – 240 V / ~4 AMPS / 50 – 60 HZ / 221 watt max.
Power requirements: 24 V DC @ 9.2 AMPS
Usage cost: ~ €0.05 / cm3 (material and power) This show is an independent production of Jerry Berg (aka Barnacules). Opinions are my own and do not necessarily reflect the opinions of my employer, friends, or any companies mentioned in the show. Email business inquiries to Barnacules@barnnerd.com Help the channel by donating BitCoin to 1MfVZVMjfUUq8srg1d4RbgXR5e7JLw7R6P
Video Rating: / 5